Hardware - Tannoy i8 AW User Manual

9. Hardware

The i8AW can be wall or ceiling mounted using the MB8 (optional) bracket (Figure 9a)
which is designed to offer maximum flexibility in selecting the desired angles.
The MB8 is supplied with M8 bolts for fixing to the loudspeaker (Figure 9b.& 9c). After
fixing the bracket to the wall or ceiling, remove the plastic plugs from the top and
bottom of the loudspeaker. Position the cabinet at the required angle as shown and
tighten the M8 Bolts to fix t he loudspeaker in position.
The loudspeaker can be mounted either horizontally or vertically using the MB8
bracket (Figure 9a & 9b). The i8 AW also has threaded M6 holes for Omni- Mount™
Series 75 (Figure 9d) and other bracketry.
Figure 9b
Figure 9d
Figure 9a
Figure 9c
NOTE: The installation of this product
must be carried out in conformity with
local building codes and standards. If
necessary consult your local safety
standards office r before installing any
product. Alternatively, check any laws
or bylaws.Tannoy will not be held
responsible for any damages caused
by the improper installation of any
bracket or loudspeaker.
7