Hardware; Performance Data - Tannoy i7 User Manual

The i7 can be wall or ceiling mounted using the MB7(optional) bracket (fig 1.)
which is designed to rotate about its axis. The MB7 is supplied with M6 bolts for fixing to
the loudspeaker. After fixing the bracket to the wall or ceiling, position the cabinet at the
required angle as shown (fig. 2) and tighten the M6 bolts to fix the loudspeaker into
position.
The loudspeaker can be mounted either horizontally or vertically using the MB7 bracket
(fig. 2. ) .
Figure 1

9. Hardware

Figure 2

10. Performance Data

Frequency Response
Impedance
NOTE: The installation of this product must
be carried out in conformity with local
building codes and standards. If necessary
consult your local safety standards officer
before installing any product. Alternatively,
check any laws or bylaws. Tannoy will not
be held responsible for any damages
caused by the improper installation of any
bracket or loudspeaker.