Technical Specifications - Tannoy i8 User Manual

10. Technical Specifications

Frequency response (1) +/- 3dB
Recommended Amplifier Power
Power Handling
Sensitivity (1)
2.83 volt @ 1m
Maximum SPL (3)
@ 1m
Impedance
DI Averaged (PCQ)
@ 1kHz (ISO)
@ 2kHz (ISO)
@ 4kHz (ISO)
@ 8kHz (ISO)
@ 16kHz (ISO)
Q Averaged (PCQ)
@ 1kHz (ISO)
@ 2kHz (ISO)
@ 4kHz (ISO)
@ 8kHz (ISO)
@ 16kHz (ISO)
Distortion
0.1 Full Power
250 Hz
1000 Hz
10000 Hz
0.01 Full Power
250 Hz
1000 Hz
10000 Hz
Driver Complement
Crossover Point
Enclosure
Finish
Protective Grille
Connectors
Fittings
Dimensions
Weight
NOTES:
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal
or exceed the published specifications which Tannoy reserve the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.
(1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m
85Hz - 22kHz
150 - 260 watt / 8 ohm
Average(2) Programme Peak (10ms)
130 watt 260 watt 520 watt
92 dB 95 dB (half space)
Average Peak Average (half space)
113 dB 119 dB 116dB
Nominal 8.0 ohm
Minimum 6.4 ohm
8.2, 250 Hz - 16 kHz
6.3
7.2
10.5
12.3
13.7
9.44, 250 Hz - 16 kHz
4.3
5.2
11.2
17.0
23.4
2nd Harmonic 3rd Harmonic
1.00% 0.31%
0.25% 0.56%
1.4% 0.14%
2nd Harmonic 3rd Harmonic
0.31% 0.25%
0.4% 0.03%
0.18% 0.5%
1 x 8" (200mm) Constant Directivity Dual Concentric
Type number 2062
Passive 1.7 kHz
th nd
4 order high pass, 2 order low pass
Dynamic HF protection
16.6 litre vented, 15mm MDF
Textured black\grey paint
Perforated steel, black with 58% free air flow
2 x 4mm binding posts
1 x Blank plate for pole mount socket
4 x M8 inserts for CUB8 Bracket
388mm(H) x 280mm(W) x 280mm(D)
15.28ins(H) x 11.02ins(W) x 11.02ins(D)
8.2 Kg (18.04 lbs)
Peak (half space)
122dB