Summary of Contents for Tannoy DUAL CONCENTRIC ic6 DC
Page 1
ic6 DC Owner’s Manual DUAL CONCENTRIC™ CEILING SPEAKER...
Page 2
If the equipment proves to be defective within this period for any reason other than accident, misuse, unauthorized modification or fair wear and tear, Tannoy will repair any such defect, or, at our option, replace it without charge for parts, labour or return carriage.
Page 3
AMPLIFIER MATCHING Consult the Technical Specification section for the acceptable range of amplifier powers. The high peak power handling of Tannoy loudspeakers permits the responsible use with more powerful amplifiers. As with all loudspeakers, power handling is a function of voice coil thermal capacity. Take care to avoid overdriving any amplifier, as the resulting distortion, or ‘clipping’, can damage the loudspeaker if allowed to continue for an extended period.
Page 4
TECHNICAL DRAWINGS ic6 DC 270mm 104mm ” ”...
Page 5
TECHNICAL SPECIFICATIONS PERFORMANCE Recommended amplifier power - Watts RMS Continuous power handling - Watts RMS Peak power handling - Watts (1) Sensitivity (2.83 Volts @ 1m) (2) Nominal impedance - Ohms Low frequency alignment (-6dB) Frequency response (-6dB) DRIVE UNITS Dual Concentric high frequency Dual Concentric...
Need help?
Do you have a question about the DUAL CONCENTRIC ic6 DC and is the answer not in the manual?
Questions and answers