Pitney Bowes DA300 Operating Manual page 93

Material
Specifications
Material Size and Thickness
Minimum
Maximum
Also see the table on the next page.
Approved Media
The paper types listed below are approved for use with the DA300 Printer. Please note
that the dimensional limits above apply in all cases, and that all media (flats, envelopes,
postcards, catalog envelopes, etc.) must be without windows, unstuffed and unsealed.
White Wove
•
Bond paper
•
Recycled paper
•
Coated paper
•
Card stock
•
Brown kraft
•
Manila
•
Perforated stock
•
Width
127mm (5")
324mm (12.75")
Material Notes
Envelopes have a flap along the long edge and are processed by the printer non-flap
edge first. Envelopes may have either a diagonal or straight edge along the envelope
flap.
Booklets are defined as media having physical dimensions 150 x 230mm (6 x 9") or
larger. Booklets have an opening along their long edge which is covered by a flap with
an adhesive seal.
Catalog envelopes have an opening along their short edge which is closed by a flap
with an adhesive seal.
Postcards have no folds or bends. The printable side may have a higher surface
roughness than the non-printable side.
Self-mailers may be of "C," "Z," or 1/2-folded construction. They may not exceed the
maximum allowable thickness as specified on the previous page and must be tabbed
per postal regulations.
A catalog may consist of multiple pages bound by adhesive or tabs on the feed edge
or at 90 degrees with respect to the feed edge.
Sheet stock may consist of 60 to 105gsm (16 to 28 lb). bond as well as 225 to 300gsm
(60 to 80 lb.) coated stock. The size and thickness constraints specified above apply.
Specifications
Height Thickness
76mm (3.5") .08mm (.0003")
343mm (13.5") 1.6mm (.062")
B-7