Pitney Bowes DA300 Operating Manual page 24

Setup
Installing and
Removing the
Ink Jet
Cartridge
2-14
7. Push the cartridge back in the direction of the arrow
until it snaps into place.
Removing the Ink Jet Cartridge
When you need to remove or replace the ink jet cartridge, follow
these steps:
1. With the printer on, press the On Line key until the
display reads OFF LINE.
2. Open the back cover of the printer.
3. Press the Cartridge key on the control panel.
This moves the carriage to the middle of the printer.
4. To remove the ink jet cartridge, hold the green cartridge
top while placing your thumb on the cartridge cradle.
5. Pull the cartridge top toward you until the cartridge pops
loose, then lift the print cartridge out of the cradle.