Pitney Bowes DA300 Operating Manual page 62

Menus
1. Address Layout
(continued)
A-8
B. Distance to Bottom (Bottom Margin)
Use this option to set the distance from the top address line to
the bottom of the envelope. For #10 envelopes this should be
about two inches.
Press the + or – buttons to increase or decrease the Distance to
Bottom, (+ MORE or – LESS) defined in inches or millimetres.
The bottom margin is the distance between the bottom edge of
the material and first line of the address. Minimum distance
between the last line of the address and the bottom edge of the
material is 5/8 inches. If less than 5/8 inches, the lower right
barcode will not be printed. Press the Enter button to enable the
desired measurement.
C. Line Spacing
Press the + or – buttons to increase or decrease the Line Spacing
(i.e., 3, 4, 6, 8 lines/inch or Automatic), defined in lines per inch.
Automatic line pitch selection is based on industry-standard
definitions for line spacing for each print pitch and style se-
lected. The printer will automatically select the correct setting
for the font and size of the characters being printed.
D. Orientation
The choices are Normal and Inverted. Select Normal for most
applications. This tells the printer that the bottom edge of the
material feeds first, with the right side running against the right
side of the printer.
The Inverted option tells the printer that the top edge of the
material feeds first. Select this option if, for example, you need
to feed envelopes flap first.