Pitney Bowes DA300 Operating Manual page 63

1. Address Layout
(continued)
E. Orientation Control
The choices are Automatic and Manual. When Orientation
Control is set to Automatic, the printer acknowledges the
orientation commands sent from the computer. Setting
Orientation to Manual notifies the printer to use the menu
settings for orientation.
Use the print quality option to select the resolution of the
printed addresses—Executive, Letter or Draft.
To use the Address Layout option:
1. Press the On Line button until the display reads OFF
LINE.
2. Press the Menu button to display the Main Menu.
3. Press the + or - buttons to scroll through the Main
Menu options until 1. ADDRESS LAYOUT appears on
the LCD panel.
4. Press the Enter button to select this option.
5. Press the + or – buttons to scroll through the AD-
DRESS LAYOUT options.
6. Press the Enter button to select the desired option (A,
B, C or D).
7. Press the + or - buttons to scroll through the choices
associated with each option.
8. When you've finished making selections, press the
menu button several times to back out of the menu
until the printer displays OFF LINE. Then press the
On Line button to enable the printer.
Menus
A-9