Setup For Audio Recording - EUROCOM Shark 5 User Manual

Storage Devices, Mouse, & Audio
2

Disabling Front Jack
Detection
It is recommended that
you do not disable front
panel jack detection in
Connector Settings
Disabling front panel jack
detection may
your internal microphone
to become disabled, and
audio may continue to
play through the sys-
tem's internal speakers
even when headphones
are plugged-in to the
headphone jack
page 7 - 9).
Figure 2 - 6
Realtek Audio
Manager - Recording
Setup
2 - 8 Audio Features

Setup for Audio Recording

To record audio sources on your computer at optimum quality follow the instruc-
tions below:
1. Go to the Control Panel.
2. Click Realtek HD Audio Manager (Hardware and Sound), or right-click the
taskbar icon
3. Click Microphone Effects (tab) in Microphone (tab), and then click to select
.
Noise Suppression (button), or adjust the Recording Volume level to around 60,
to obtain the optimum recording quality.
4. Click OK to close the control panel and save the settings.
cause
(see
and select Sound Manager.

Sound Blaster
Cinema 2 Audio
Note that you will need
to install the Sound
Blaster Cinema 2 audio
application in order to
get maximum audio
performance. See
"Sound Blaster Cinema
.
2" on page 6 - 13