EUROCOM Shark 5 User Manual page 164

Modules
6
Figure 6 - 11
Sound Blaster Cinema
2 Select Headphones
6 - 22 Sound Blaster Cinema 2
Sound Blaster Cinema 2 Advanced Settings
Sound Blaster Cinema 2 selects the built-in speakers by default and this setting may
cause some sound quality issues when using headphones. To adjust the settings for
headphones do the following:
1. Run the Sound Blaster Cinema 2 application.
2. Click the Advanced Settings icon
3. Select Headphones from the drop-down menu (you can adjust the slider for
crossover frequency and Test to hear the effect chosen).
4. Click Exit and close the application (or click the icon
Advanced Settings
.
again to exit).