Pci/Pnp Setup - DTK PAM-0073I User Manual

Chapter 4
Suspend Timeout (Minute)
This option specifies the length of the period of system inactivity when the computer is already in
Standby mode before the computer is placed in Suspend mode. In Suspend mode, nearly all
power use is curtailed. The settings are Disabled, 1 Min, 2 Min, and all one minute intervals up to
and including 15 Min. The default settings are Disabled.
Slow Clock Ratio
This option specifies the speed at which the system clock runs in power saving modes. The
settings are expressed as a ratio between the normal clock speed and the power down clock speed.
The settings are 0-12.5%, 12.5-25%, 25-27.5%, 37.5-50%, 50-62.5%, 62.5-75%, 75-87.5%.
4.7

PCI/PnP SETUP

PCI/PnP Setup options are displayed by choosing the PCI/PnP Setup Icon from the
Setup Menu. The standard option is shown on the following screen.
AMIBIOS SETUP - PCI / PLUG AND PLAY SETUP
(C)1996 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
PCI Latency Timer (PCI Clocks)
PCI VGA Palette Snoop
PCI IDE BusMaster
OffBoard PCI IDE Card
OffBoard PCI IDE Primary IRQ
OffBoard PCI IDE Secondary IRQ
Assign IRQ to PCI VGA Card
PCI Slot1 IRQ Priority
PCI Slot2 IRQ Priority
PCI Slot3 IRQ Priority
PCI Slot4 IRQ Priority
DMA Channel 0
DMA Channel 1
DMA Channel 3
DMA Channel 5
DMA Channel 6
DMA Channel 7
IRQ3
IRQ4
32
: No
: 32
: Disabled
: Disabled
: Auto
: Disabled
: Disabled
: Yes
: Auto
: Auto
: Auto
: Auto
: PnP
: PnP
: PnP
: PnP
: PnP
: PnP
: PCI/PnP
: PCI/PnP
Fig. 17 PCI/PnP Setup Menu
Available Options:
No
Yes
↑↓ : Sel
ESC: Exit
PgUp/PgDn: Modify
F2/F3: Color