Table of Contents
Advertisement
Troubleshooting
Consumable Information Screen
In order to assure optimum printing, the machine acquires information from the consumables.
If acquired matching information is not proper, the Consumable Information screen is shown.
Enter appropriate values.
The
icon on the Info Button will be greyed out when this occurs.
p.212
Note:
• Entering an inappropriate value does not affect usual operations but may result in bad print quality.
• When you perform the following operations, the values set on the "Consumables Information Input Wizard" screen
disappears and thus you need to enter the values again.
– After the power switch is set to
– After the machine is placed into the Sleep status, the
• If you are not sure the best setting for the consumables used in the machine, we may suggest that you use "1"
(default setting) except for "H1" setting and adjust from there if necessary based on the result of the printed copies.
Riso takes no responsibility, and cannot advise as to the best setting, for particular consumables not manufactured
and sold by Riso.
Ink Information Input Screen
This screen pops up when data could not be obtained from the Ink Cartridge.
Ink
Cannot Get Consumables Info
Input Values Required
Touch [OK] and enter values as shown below.
Screen Display
Consumables Information Input Wizard
Ink Information Input (Drum 1)
H1 Ink Colour Setting
1: Black
244
When a Message Displays
(OFF), the switch is set to
OK
[H1] Ink Colour Setting (for Print Drum 1)
[H7] Ink Colour Setting (for Print Drum 2)
Select the same colour as the Print Drum
currently in use.
2: Colour
Next>
RISO EUROPE LIMITED & European Subsidiaries
(ON) again
key is pressed
Description
Values
1: Black 2: Colour
Advertisement
Table of Contents
Troubleshooting
