Riso MZ770 User Manual page 211

5
Place the original.
Note:
• For information about placing the original, see
step 4, "Printing from a Paper Document or
Book".( p.39)
• To scan a single sheet of an original, place it on
the Platen Glass.
• When Duplex Printing from odd number of orig-
inals scanned in the ADF unit, the reverse side
of the last page will be blank.
6
Select Print functions as needed.
The following functions are available:
• Image Processing mode ( p.68)
• Scanning Contrast ( p.75)
• Size (enlargement/reduction) ( p.76)
• Dot Process ( p.70)
• Memory ( p.140)
• Contrast Adj ( p.72)
• Tone Curve ( p.73)
• Book Shadow ( p.82)
• Top Margin ( p.103)
• Preview ( p.107)
• Overlay ( p.190)
• Storage Memory ( p.186)
• Digital Copy Count ( p.154)
7
Enter the number of copies using the
Print Quantity Keys.
The number is displayed on the Print Quantity Dis-
play.
Note:
• To change the number, press the
then re-enter the correct number.
RISO EUROPE LIMITED & European Subsidiaries
When using a Linked Printer (sold separately)
8
Press the
The next steps are different, depending on
whether the original is scanned from Platen Glass,
or from the ADF unit.
Perform one of the following steps:
Important!:
• Either Platen Glass or ADF unit may be used,
but not both at a time.
Using the Platen Glass
Place the first original document on the Platen
Glass, wait for the message "Duplex Process-
ing for Linked Printer" to disappear, then place
the second original and press the
Once data for both sides of the paper is trans-
mitted, the Linked Printer will print the specified
number of copies.
To print multiple Duplex Print copies, repeat
steps 5-7 of Duplex Printing.
Important!:
• Once the first original is scanned, the next orig-
inal must be placed within pre-determined
Duplex Interval period on the Admin. screen
( p.163). Failure to do so will result in the
key,
Linked Printer printing one side only.
key.
key.
Duplex Printing [Duplex] 209