Table of Contents
Advertisement
3
Load paper.
See
p.31 for details on how to load the paper.
4
Set up the Paper Receiving Tray.
See
p.33 for details on how to set up the Paper
Receiving Tray.
5
Place the original for Drum 1.
Place the original on the Platen Glass or in the
optional ADF (Auto Document Feeder) unit.
When placing on the Platen Glass
Place the original face down on Platen Glass.
Align centre on the top edge, and close Platen
Cover.
Magazines, books, scrap books, etc. should be
placed on Platen Glass.
RISO EUROPE LIMITED & European Subsidiaries
Tip:
Using the Gauge Cover
The Gauge Cover allows you to align original
images precisely on the Platen Glass even if
they are not squared on the sheet. Shift the
original sheet along the grid lines printed on the
cover, touching it through the openings on the
cover.
Gauge Cover
Place the original
face-down
When placing in the ADF unit
(Option)
Use the ADF unit if you are printing multiple
originals in succession. Place originals face-
down and then adjust the ADF Original Guides
to the width of the originals. Insert the originals
as far into the ADF unit as possible.
If you are using the ADF unit, both originals for
Drum 1 and Drum 2 can be set together. If you
choose to do so, place the original for Drum 1
on top and the original for Drum 2 on the bot-
tom.
Note:
• If you are placing the originals one at a time,
for the procedures below, place them in the
same way you would when placing on the
platen glass. If two originals are placed at
once, the procedures differ, since masters
are consecutively made from Drum 1 and
Drum 2.
2-Colour Printing with 2 Originals
Basic Operations
Grasp here
and lift up the
gauge cover
39
Advertisement
Table of Contents
Troubleshooting
