Riso MZ770 User Manual page 239

J00-000:Paper Jam Error
Displays when the original document or printing paper is jammed
inside the machine or the ADF unit (option).
The location of the paper jam is indicated by the flashing icon (
) in the illustration. Refer to the table below (
the issue as indicated.
Note:
• Use appropriate printing paper to prevent paper jams. Also select
appropriate original document suitable for the ADF unit.
p.14
p.16
Area
Indicated/
Blinking
Paper is jammed in the Paper Feed area.
The original is jammed in the ADF unit (option). When removing in the document insertion direction
RISO EUROPE LIMITED & European Subsidiaries
- ) and resolve
Possible Cause
Paper Jam
Remove Paper in Indicated Areas
and Press [OK] Button
-
Action
1)
Check the paper feed side and remove the
jammed paper.
2)
Touch [OK].
Note:
• When using special paper, adjust the
Paper Feed Pressure Adjustment Lever
according to the paper characteristics.
p.31
Pull the ADF Original Release Lever to the right,
and pull out the original.
ADF Original Release Lever
When removing in the document ejection direction
Raise Platen Cover, turn the ADF Original
Release Dial and remove the original.
Original Release Dial
When a Message Displays
Troubleshooting
237