Riso MZ770 User Manual page 233

Hide thumbs Also See for MZ770:
Table of Contents

Advertisement

T00-000:Service Call Error (in alphabetical order)
Message
!!Battery Replacement!!
Call Service
!!System Error!!
Press Reset Key
If Recovery has Failed, Call Service
!!System Error!!
Turn Main Power SW OFF Then ON
If Recovery has Failed, Call Service
A00-000:Paper Jam Errors (in alphabetical order)
Message
Master Disposal Error
Pull Out Print Drum 1 and
Discard Master
Master Disposal Error
Pull Out Print Drum 2 and
Discard Master
Master Jammed in Disposal Unit
Pull Out Master Disposal Box 1 and
Remove Jammed Master
Master Jammed in Disposal Unit
Pull Out Master Disposal Box 2 and
Remove Jammed Master
Master Loading Error
Pull Out Print Drum 1 and
Discard Master
Master Loading Error
Pull Out Print Drum 2 and
Discard Master
RISO EUROPE LIMITED & European Subsidiaries
Possible Cause
The battery is low or depleted.
A system error has occurred.
Possible Cause
The master was not properly
discarded.
The master is jammed in the
Master Disposal Unit.
The master did not properly
attach to the Print Drum.
Action
Contact your dealer (or authorised service
representative) and have the battery
replaced.
Press the
key or the
the error message display.
Press the
key.
If the problem persists, contact your dealer
(or authorised service representative).
Shut off power, then restart.
If the problem persists, contact your dealer
(or authorised service representative).
Action
1)
Pull out the Print Drum and remove
the master from the drum.
If a master is not wrapped around the
drum, check the disposal unit and
remove the master.
p.220
2)
Return the Print Drum in place.
3)
Press the
key.
Pull out the Master Disposal Box and
remove the jammed master.
If the masters are difficult to remove, pull
out the drum and then remove.
p.218
p.220
If the error persists, contact your dealer (or
authorised service representative).
1)
Pull out the Print Drum and remove
the master from the drum.
p.220
2)
Return the Print Drum in place.
3)
Pull out the Master Making Unit and
reinstall the master.
4)
Press the
key.
When a Message Displays
Troubleshooting
key to clear
231

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents