Riso MZ770 User Manual page 43

Once the masters are made, one proof copy from
Drum 1 alone is printed, and the Master Making
Basic Screen for Drum 2 appears.
In step 5, if two originals have been placed
together in the ADF unit, one proof copy from
Drum 1 only is printed, and the master is subse-
quently made on Drum 2. Continue on to step 11.
Tip:
Auto Idling
When "Auto Idling" is set to ON, idling operations
may occur when master-making process is initi-
ated.
Factory default is set to idle automatically at the
beginning of the master-making when the
machine is inactive for over 12 hours.
To toggle "Auto Idling" ON/OFF, or to modify
number of hours before activating next idling, go
to the Admin. screen.
p.161
Idling can also be manually initiated when making
a master.
p.150
8
Place the original for Drum 2.
When Placing on Platen Glass
Remove the original for Drum 1 from the platen
glass and place the original for Drum 2 in the
same way as indicated in step 5.
When placing one original at a time
in the ADF unit (when [Auto
Process] is turned off)
You do not need to remove the Drum 1 original.
Place the original for Drum 2 in the same way
indicated in step 5.
RISO EUROPE LIMITED & European Subsidiaries
9
Set the print functions for the Drum 2
original.
You can set print functions of the original for Drum
2 as needed.
If you make no settings, the same settings as the
first original are applied.
Note:
• The print functions that can be set for the Drum
2 original are as shown below.
Auto Process ( p.81)
Making a master and printing in one pass
Image Processing mode ( p.68)
Selecting Image Processing mode for the
document
Scanning Contrast ( p.75)
Selecting Scanning Contrast for the original
Size ( p.76)
Enlarging/Reducing the Image
Dot Process ( p.70)
Applying Dot Process to photos
Tone Curve ( p.73)
Adjusts the gradation of a photo original.
Top Margin ( p.103)
Cuts the top margin of an original with a mar-
gin and creates a master.
Side Margin ( p.105)
Adjusts the side margins and creates a mas-
ter.
This setting is available when the ADF (Auto
Document Feeder) unit (Option) is installed.
Max. Scan ( p.99)
Making a master that utilizes the maximum
printing area
10
Press the
The scan of the original for Drum 2 begins.
2-Colour Printing with 2 Originals
Basic Operations
key.
41