Scanning An Original For 1-Colour Printing - Riso MZ770 User Manual

Scanning an Original for 1-Colour Printing

1
Select a scan mode.
See p.23 for information about selecting a scan
mode.
2
Place the original.
See step 5 of "1-Colour Printing" ( p.49).
Go to step 4 if you are not specifying folder, data,
or owner name. If no settings are configured, data
is stored by default (Data Name: scan_001, Save
Location:1_folder, Owner:Owner-1).
3
Setting data information.
Sets the data name, save location and owner
name.
p.183
4
Setting required functions.
Set the required functions for scanning the origi-
nal.
Note:
• See the previous section for the functions that
can be set.
• You can instantly check scanned data by ena-
bling "Preview".
Important!:
• Set "Format" when scanning custom-sized orig-
inals.
p.185
To specify the original colour:
You can specify the print colour of the data you
retrieve for printing.
If a drum of a colour differing from the print col-
our selected is present, a message is displayed.
RISO EUROPE LIMITED & European Subsidiaries
Storage and Scan Modes (Option)
Note:
• The factory setting is [No Entry].
There is no particular need to set if printing
1-Colour originals.
1)
Touch [Functions].
2)
Touch [Colour].
The Colour screen appears.
3)
Touch [Mono-Colour].
Converting Hard-copy to Stored Data (Scan Mode) 179