Using A Usb Flash Drive To Update Software - KVH Industries TracPhone V3IP User Manual

Using a USB Flash Drive to Update Software

To update the software using a USB flash drive, follow these steps:
1. First, you need to save the latest software update file to the root
directory of your USB flash drive. KVH-certified technicians
can download this file from the KVH Partner Portal.
Customers can get this file from KVH Technical Support (see
"Contacting KVH Technical Support" on page
2. Make sure the TracPhone system is turned on and initialized
(the ICM front panel LCD shows "Searching" or "Tracking").
3. Connect your USB flash drive to the USB port on the front of
the ICM.
4. The ICM display shows the currently installed software
version ("CUR") and the software version found on the USB
flash drive ("NEW"). Make sure the "NEW" version is a higher
number than the "CUR" version.
5. At "PROCEED WITH UPDATE?," press ACCEPT.
Figure 9-5 Software Update Process on ICM Front Panel
S/W UPDATE FOUND
NEW VERSION: 344
UPDATE SOFTWARE?
CUR:342 NEW:344
PROCEED WITH UPDATE?
YES EXIT
TracPhone V3-IP User's Guide
Maintenance
126).
135