Advertisement
Step 3 - Install Radome and Apply Power
Follow the steps below to reinstall the radome and
reconnect power.
a. Inspect the inside of the antenna to make sure
you have not left any tools or debris inside.
b. Reinstall the radome onto the antenna (see
Figure 12). Secure the radome with six or eight
new #10-32 screws (supplied in kit).
c. Reconnect power to the antenna.
Step 4 - Update the Software
Follow the instructions in the TracVision HD7
Installation Guide or User's Guide to update the
system software to the latest version, then test
antenna operation. If the problem persists, contact
KVH Technical Support.
The replacement procedure is complete!
6
Figure 12: Radome Screws
#10-32
Radome
Screw
(x6 or 8)
Baseplate
Advertisement
