TracPhone V3-IP User's Guide
Network Configuration
66
5. Make sure all computers are configured for DHCP addressing
(see
"Configuring Computers for DHCP" on page
connected to the primary system's ICM (via Ethernet cables or
Wi-Fi) will receive IP addresses from the ICM via DHCP. The
ICM serves as a router.
NOTE: By default, the ICM has a gateway of 192.168.5.1 and assigns IP
addresses in the 192.168.5.100-200 range. If this configuration conflicts with
an existing onboard network, you may change the settings at the TracPhone
V3-IP web interface (go to Settings > Network Settings). See
on ICM" on page 78
for details.
6. To enable the ICM's built-in wireless access point (WAP) for
Wi-Fi access, follow the steps in
page
70.
72). Devices
"LAN Settings
"Wireless Settings" on