Crew-3 Configuration
Ethernet Ports
1, 2, 3, 4, and Wi-Fi
Figure 6-11 Crew-3 Configuration Diagram
Crew-4 Configuration
Ethernet Ports
1 and 2
3 and Wi-Fi
4
NOTE: See
"Static IP Configuration" on page 56
and its additional setup steps.
Figure 6-12 Crew-4 Configuration Diagram
To set up the network in a crew configuration, follow these steps:
1. At the TracPhone V3-IP web interface or myKVH web portal,
select the desired Crew network configuration. Refer to
"Selecting a Network Configuration" on page 51
2. Connect the Crew computers and/or network devices to the
"User Ethernet ports" on the ICM that are designated "Crew
LAN." Use straight-through 100 Mbps fast Ethernet UTP CAT5
cables (or better) with RJ45 connectors.
Internet Access
User login required (Crew LAN)
Internet Access
Unrestricted (Ops LAN)
User login required (Crew LAN)
Static IP (WAN)
for details about static IP
TracPhone V3-IP User's Guide
Network Configuration
for details.
61