Getting Started; Camera Unit Power Supply; Parent Unit Battery Installation - Motorola MBP843CONNECT User Manual

2. Getting Started

2.1

Camera Unit Power Supply

1. Insert the Power Adapter plug into the micro USB socket at the back of the
Camera Unit.
2. Connect the other end of the Power Adapter into a suitable electrical
outlet.
3. Switch the ON/OFF button to the ON position.
The colored LED will now start flashing slowly.
2.2

Parent Unit Battery Installation

1. Insert the wire tabs of the rechargeable battery pack into the contact slots
as shown above and fit the battery pack into the compartment.
2. Place the battery compartment cover over the battery, making sure that
the battery wires are carefully pushed down and the cover fits properly.
Getting Started
Switch to turn ON the camera
Black Red
Power adapter plug
9