Using The Wi-Fi ® Video Baby Monitor; Setting Up; Pan And Tilt; Night Vision Mode - Motorola MBP843CONNECT User Manual

3. Using the Wi-Fi
3.1

Setting up

• Place the Camera Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the Camera Unit's camera angle by rotating the camera up, down, left
and right until you are satisfied with the image in the Parent Unit.
NOTE
Do not place the Camera Unit within baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure that
they are not close to other electrical equipment.
3.2

Pan and Tilt

The camera can be remotely controlled from the Parent Unit.
1. Press the + UP button or - DOWN button to tilt upward or downward.
2. Press the < LEFT button or > RIGHT button to pan left or right.
3.3

Night Vision Mode

The Camera Unit has 8 high-intensity infrared LEDs for picking up clear images
in the dark. When the built-in photo sensor detects a low level of ambient light,
the LEDs will automatically activate and the screen on the Parent Unit will display
in black and white. The
3.4

Talk Mode

Press and hold the
the Camera Unit's loudspeaker. The
LCD screen.
3.5

Video ON/OFF

V
Press the VIDEO ON/OFF button to turn the LCD display on or off. The
audio monitor will remain On.
3.6 Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the
Camera Unit will be displayed at the top of the LCD screen. The readings will
turn RED if the temperature goes above 29ºC / 84ºF or below 14ºC / 57ºF.
The reading will change to HH °C / °F if the temperature goes above 36ºC
/ 97ºF. The reading will change to LL °C / °F and icon flashes in red if the
temperature goes below 1ºC / 34ºF.
12
®
Video Baby Monitor
icon will be displayed at the top of the LCD screen.
T
TALK button on the Parent Unit to talk to your baby through
T
icon will be displayed at the top of the
Using the Wi-Fi® Video Baby Monitor