Basic Connections - Mitsubishi Electric PK20 User Manual

Basic connections

This projector can be connected with various devices
such as a VCR, video camera, videodisc player, or
personal computer that have analog RGB output
connectors.
Important:
Make sure that the connected device is turned off
before starting connection.
Plug in the AC adapter of the projector and the
connected devices firmly. When unplugging, hold and
pull the plug. Do not pull the cord.
When the projector and the connected devices are
located too close to each other, the projected image
may be affected by their interference.
See the owner's guide of each device for details about
its connections.
When AUDIO OUT is connected with the earphone or
external speaker, the sound will not come out from the
projector speaker.
Speaker output: Vin (max)= 0.74Vrms, the maximum
output is 1W at Vin (max).
NO sound will come out from the speaker or AUDIO
OUT if video signals are not input. Furthermore, the
sound cannot be adjusted as well.
When the SD card source is selected, the sound input
in AUDIO IN will not come out from the speaker or
AUDIO OUT.
EN-18
Projector + AV device
VCR etc.
VIDEO IN
S-VIDEO IN
AUDIO IN
AUDIO OUT
to Audio output
to S-video output
to video output