Table of Contents
Advertisement
To move the image vertically:
Adjust VERT. POSITION in the SIGNAL menu. Press the
the image downward.
When the image flickers:
Adjust FINE SYNC. in the SIGNAL menu.
Simple adjustment method
1. Select HORIZ. POSITION in the SIGNAL menu.
2. Press the
or
button to adjust the horizontal start position (or the left side of the image).
3. Select TRACKING in the SIGNAL menu.
4. Press the
or
button to adjust the horizontal end position (or the right edge of the image).
5. Repeat steps 1 to 4 for optimum adjustment results.
6. Select VERT. POSITION in the SIGNAL menu.
7. Press the
or
button to adjust the vertical start position (or the upper edge of the image).
button to move the image upward. Press the
button to move
EN-35
Hide quick links:
Advertisement
Table of Contents
