Table of Contents
Advertisement
Basic connections
This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players.
Important:
• Make sure that your equipment is turned off before connection.
• Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.
• If connected units are set too close to one another, the image may be affected.
• Refer to the user manual of each component for details of connections.
Projector + AV equipment
Important:
• Match the color of video and audio plugs on the AV cable with the connections.
• S-video signals take priority over video signals. If you input both S-video signals and normal video signals at
the same time, the normal video input automatically is inhibited.
MAIN
• Speaker output is mono.
Projector + DVD player or HDTV decoder
In the case of a DVD player equipped with a COMPONENT VIDEO output (525i / 625i), connect the DVD player
with the COMPUTER 2 / COMPONENT IN connector.
DVD player or HDTV decoder
Y
C
(P
B
B
G
B
Mini D-SUB 15 pin-BNC
conversion cable (option)
• When a DVD player is connected with the COMPUTER 1 IN connector, the image may not be projected cor-
rectly.
• When a 525p signal is inputted, select YC
• Y, P
, P
is an example of the terminal names for a HDTV decoder.
B
R
• The terminal name is different depending on the connected equipment.
• Use mini D-SUB 15 pin-BNC conversion cable for connection.
• Some DVD players may not project the image correctly.
• When connecting with HDTV equipment which has R, G, B output, select RGB for the COMPUTER INPUT in
the SIGNAL menu.
• A TV60 or TV50 signal (except SCART input signal) corresponds to component video signal only. When the
RGB signal with 5 line form is inputted, the image will not be projected correctly.
EN – 10
MOUSE /RS-232C
VIDEO 1
VIDEO 2
COMPUTER 1 IN
IN
IN
S-VIDEO
AC IN
VIDEO
COMPUTER 2 / COMPONENT IN
COMPUTER
AUDIO IN
AUDIO
VCR etc.
to AUDIO OUT
)
C
(P
)
R
R
BNC - RCA connector
(option)
No connection
HD/CS
VD
R
C
B
to S-VIDEO (1or2) IN
AUDIO OUT
to VIDEO (1or2) IN
COMPUTER OUT
to AUDIO (1or2) IN
to audio output
to video output
to S-video output
to COMPUTER AUDIO IN
MAIN
AC IN
to COMPUTER 2 IN
/ YP
P
for the COMPUTER INPUT in the SIGNAL menu.
R
B
R
Connect either one of these.
AUDIO cable
MOUSE /RS-232C
VIDEO 1
VIDEO 2
COMPUTER 1 IN
IN
IN
S-VIDEO
VIDEO
COMPUTER 2 / COMPONENT IN
COMPUTER
AUDIO IN
AUDIO
AUDIO OUT
COMPUTER OUT
Advertisement
Table of Contents
