Basic Connections - Mitsubishi Electric XD430U User Manual

Basic connections

This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB
output connectors.
Important:
• Make sure that the connected device is turned off before starting connection.
• Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord.
• When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.
• See the owner's guide of each device for details about its connections.
Projector + AV device
Important:
• Match the colors of the video and audio plugs on the Audio cable with those of the terminals.
• Speaker output is mono.
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for 3-line fitting (Y, C
PUTER IN terminal.
DVD player or HDTV decoder
No connection
B R
Mini D-SUB 15-pin - BNC conversion
cable (option)
Important:
• The terminal's names Y, P
B
• The terminal's names vary depending on the connected devices.
• Use a Mini D-SUB 15-pin - BNC conversion cable for connection.
• Image may not be projected correctly with some DVD players.
• When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.
• Speaker output is mono.
EN-10
VCR, etc.
Audio cable (option)
to audio output
BNC - RCA connector (option)
, and P are given as examples of when a HDTV decoder is connected.
R
http://www.pureglare.com.au
S-VIDEO IN
(option)
AUDIO IN
(option)
to audio output (L)
to audio output (R)
to S-video output
, C ). When connecting such DVD player with this projector, use the COM-
B R
COMPUTER IN