Basic Operation - Mitsubishi Electric PK20 User Manual

Basic operation

On the control panel
3
EN-22
4 3
Power-on
1. Turn on the device connected to the projector first.
2. Plug the AC adapter in both the projector and the wall
outlet.
The POWER indicator lights up.
The CHARGE indicator lights up when the projector
connects with a not fully charged optional battery.
The projector charges a not fully charged battery
all the time when connecting with a not fully charged
battery.
The projector stops charging battery when
battery is fulled.
3. Press the POWER button either on the control panel
or the remote control.
The LAMP indicator lights up and the POWER
indicator goes off.
The lamp occasionally fails to light up. Turn off
the projector, wait for one minute and then turn
on it again.
After the POWER button is pressed, the image
may flicker before the lamp becomes stable. This
is not a product malfunction.
Indicator
Condition
Stand-by.
When the lamp is on.
LAMP (Green) POWER (Red)
Off On
On Off