Using The Sd Card Viewer - Mitsubishi Electric PK20 User Manual

Using the SD card viewer

This projector enables you to read JPEG and MPEG files from the SD card and show the images on a screen. This can
be used to give a presentation and/or present a slide show without using a computer.
Important:
The input method cannot be changed with the button on the main unit during the [VIEWER] input display.
The remote control can change the input.
Caution:
During the searching time period, only Menu and Source button work.
In case of an emergency, we recommend that you back up data stored in the SD card before using the viewer. (We will
not be responsible for any damage such as loss of data that occurs from using this projector.)
For complete compatibility, be sure to select FAT 32 (> 256MB) and FAT as the file system when you format the SD card on
your computer. Memory cards formatted in FAT 32 (< 128MB) and NTFS file system will not be recognized by this projector.
Memory cards formatted in SDHC file system will not be recognized by this projector.
.jpeg and .JPEG are the file extensions that are supported.
The following are the supported Movie files and Maximum resolution.
Format
Motion JPEG
MPEG-1
MPEG-4
The sound format when playing a movie is MP2, AAC, or PCM.
There is a limit to the number of folders and files that can be displayed in the thumbnail display. Up to 127 folders and
512 files can be displayed.
Up to three hierarchy levels including the top level can be displayed in the thumbnail display.
Some JPEG files and MPEG files (including sound) are not supported with this device.
The SD card viewer function of this device may not function properly if a file in the SD card is damaged.
Max. Resolution
352x288
640x480
352x288
Extension
.MOV/.mov
.AVI/.avi
.MPG/.mpg
.MP4/.mp4
.3GP/.3gp
.AMC/.amc
.MOV/.mov
EN-29