Using The Tripod - Mitsubishi Electric PK20 User Manual

Using the tripod

Mount the projector onto a tripod as shown in the illustration.
Important:
After attaching the tripod plate
onto the projector, be sure that
the adjustable rubber foot is
properly tighten.
Do not place the tripod on inclined
or unstable surfaces. This might
cause the projector to fall or tilt
over, causing injury and damage
to the projector.
Before you move the projector,
detached the projector and tripod.
Do not use excessive force when
handling the projector. This might
cause damage to the projector.
Keep the adjustable rubber foot
in a safe place (such as the
carrying bag).
Before placing the projector into
the carrying bag, be sure to place
back the adjustable rubber foot
at its original position on the
projector.
EN-17