Energy Saver; To Change Air Flow Direction - Sharp AF-06CSL Service Manual

ENERGY SAVER

During normal operation, the thermostat automatically controls cooling and the fan runs continuously.
When the ENERGY SAVER is selected, the thermostat automatically controls cooling and the fan
automatically stops when the compressor is not operating. (Fan will stop 30 seconds after the compressor
stops. After the fan stops, the fan is programmed to rotate for approx. 2 minutes to detect room
temperature. This will occur within a 20 min time span.)
ENERGY SAVER indicator
F
hr
COOL / FAN TEMP
SELECTOR
ENERGY SAVER pad
NOTE: ENERGY SAVER cannot be set during fan only (HIGH FAN, MED FAN, LOW FAN)
operation.

TO CHANGE AIR FLOW DIRECTION

The horizontal louvers are used to adjust the UP / DOWN direction of air flow, and the vertical
louvers are used to adjust the LEFT / RIGHT direction of air flow for uniform and efficient
cooling of the room.
Horizontal louvers
Adjust UP/DOWN air flow
1
POWER
ON/OFF
2
TIMER ENERGY
ON/OFF SAVER
Adjust LEFT/RIGHT air flow
7
During cooling operation
Touch ENERGY SAVER pad.
• ENERGY SAVER indicator will light.
To cancel, touch ENERGY SAVER
pad again.
• ENERGY SAVER indicator will go
off.
Vertical louvers
AF-06CSL
Lever