Energy Saver; To Change Air Flow Direction - Sharp AF-R80CX Installation And Operation Manual

ENERGY SAVER

During normal operation, the thermostat automatically controls cooling and the fan runs continu-
ously. When the ENERGY SAVER is selected, the thermostat automatically controls cooling and
the fan automatically stops when the compressor is not operating. (Fan will stop 30 seconds after
the compressor stops. Even after the fan stops, the fan will rotate for 2 minutes, every maximum
20 minutes, to detect room temperature.)
COOL / FAN TEMP
SELECTOR
ENERGY SAVER pad
ENERGY SAVER indicator
NOTE: ENERGY SAVER cannot be set during fan only (HIGH FAN, MED FAN, LOW FAN)
operation.

TO CHANGE AIR FLOW DIRECTION

The horizontal louvers are used to adjust the UP / DOWN direction of air flow, and the vertical
louvers are used to adjust the LEFT / RIGHT direction of air flow for uniform and efficient cooling
of the room.
Horizontal louvers
Adjust UP/DOWN air flow
F
hr
ENERGY
TIMER
POWER
ON/OFF SAVER
ON/OFF
HOW TO OPERATE
During cooling operation
1
Touch ENERGY SAVER pad.
• ENERGY SAVER indicator will light.
2
To cancel, touch ENERGY SAVER
pad again.
• ENERGY SAVER indicator will go
off.
Vertical louvers
Adjust LEFT/RIGHT air flow
Lever
13