Product Care - CYBEX ALLAS 2-fix User Manual

24

ProDuCt Care

In order to guarantee the best possible protection of your child seat, it is necessary that
you take note of the following:
– All important parts of the child seat should be examined for any damages on a regular
basis. The mechanical parts must function flawlessly.
– It is essential that the child seat does not get jammed between hard objects e.g. like the
door of the car, seat rail etc. causing possible damage to the seat.
– The child seat must be examined by the manufacturer after a fall or similar situations.
remoVing the CoVer
The seat cover consists of four parts which are fixed to the seat either by velcros, press
buttons or button holes. Once you have released all fixations, the cover parts can be
removed.
In order to put the covers back on the seat, proceed in the reversed order as removing
them.
Warning! the child seat must never be used without the cover.
remoVing the seat CoVer from the BaCKrest
1. Pull the headrest (e) into its top position by using the release handle (h).
2. To release the headrest (e), simultaneously pull the handle (h) and the lower rim of the
upper rib of the backrest (a). Now the headrest (e) can be completely detached.
3. Now the cover can be removed.
4. To reassemble, pull the adjustment handle (h) and insert the headrest (e) into the
backrest (a).
CLEANING
It is important to use only original CYBEX seat cover since the cover is also an essential
part of the function. You may obtain spare covers at your retailer.
note! Please wash the cover before using it the first time. Seat covers are machine
washable at max. 30°C on delicate cycle. If you wash it at a higher temperature, the cover
fabric may lose colour. Please wash the cover separately and never dry it mechanically!
Do not dry the cover in direct sunlight! You can clean the plastic parts with a mild
detergent and warm water.
Warning! Please do not use chemical detergents or bleaching agents under any
circumstances!