Description - ESAB MobileFeed 300 AVS Instruction Manual

sectIon 1
•
Arc voltage feeder capable of use with Constant
Current (CC) or Constant Voltage (CV) units
•
Available with "CC" torch connection
•
4 roll drive stand
•
Secondary contactor
•
Built for harsh environments such as construction
sites, pipe lines, shipyards, offshore, general
fabrication, mobile welding rigs and more
•
Totally enclosed, impact-resistant case protects
welding wire from dirt, metal grit, moisture and other
contaminants.
•
Flame retardant, molded plastic case will stand
extreme abuse like hot slag, grinding sparks, corrosive
chemicals, knocks, bumps, drops and more
•
Operates with reverse polarity (wire DC +) or straight
polarity (wire DC-)
•
Permanent magnet drive motor with PWM drive, solid
state control - provides powerful, dependable wire
feeding and controlled wire acceleration for smooth
arc starts and chatter-free solenoid operation
•
Electronic Dynamic Braking
•
Safety features include insulated case, low voltage
torch trigger circuit and overload protection
•
Designed to meet the most rigid standards. CSA
certified for USA and Canadian requirements.
Meets lEC-974-1 specifications.
Ordering Information
Each MobileFeed wire feeder includes gas solenoid and
dual groove feed rolls and digital meter.
Mobilefeed 300 aVs lc40 ............................. 0558005729
Mobilefeed 300 aVs lc40 push/pull ........ 0558005745
Includes .045 - 1/16 in. (1.2 - 1.6 mm) serrated groove drive rolls.
Mobilefeed 300 aVs oKc ce ........................ 0558005728
Mobilefeed 300 aVs oKc push/pull ce ... 0558005832
Includes .035 - .045 in. (0.9 - 1.2 mm) V groove drive rolls.
note:
0558005729 and 0558005745 have LC40 type cable connector
0558005728 and 0558005832 have OKC type cable connector.
Specifications
Mobilefeed 300 aVs
Wire Speed Range* ...................................... 50 - 800 ipm (1.3 - 20.3 m/min)
* actual speed range will depend on the arc voltage
Wire Diameter Capacity .................................. .030 - 5/64 in. (0.8 - 2.0 mm)
Primary Input** (open circuit voltage or arc voltage)
Minimum..................................................................................................16.5vdc
Maximum ......................................................................... 100vdc (113v peak)
** not for use with AC power
Weight .............................................................................................32 lbs (14.5 kg)
and
Mobilefeed 300 aVs feeder
(aVs = arc Voltage sensing)
common to Mobilefeed 300 aVs
Standard - 2-in (5.1 cm) ID spindle hub
12 in. OD (30.5 cm) spools - no adaptor required
physical Dimensions
Case W x H x L .................................................................... 8.56" x 17.19" x 20.69"
................................................................................. (217mm x 437mm x 526mm)
MobileFeed feeders will fit through 17.75 in. (451mm) diameter hole.
Required Accessories
Drive Rolls & Guide Tubes ............................ see table on next page
19

DescrIptIon