Draytek Vigor2860 series User Manual page 677

tx
rx
shared
E x a m p l
E x a m p
> ip bandwidth default 200 800
> ip bandwidth add 192.168.1.50-192.168.1.100 10 60
> ip bandwidth status
IP range:
192.168.1.50 - 192.168.1.100 : Tx:10K Rx:60K
Current ip Bandwidth limit is turn off
Auto adjustment is off
T e l n e t C o m m
T e l n e t C o m m
This command allows users to set IP-MAC binding for LAN host.
S S y y n n t t a a x x
ip bindmac on
ip bindmac off
ip bindmac strict_on
ip bindmac show
ip bindmac add [IP][MAC][Comment]
ip bindmac del [IP]/all
S y n t a x
S y n t a x
Parameter
on
off
strict_on
show
add
del
IP
MAC
Comment
All
Vigor2860 Series User's Guide
e
l e
a n d : i p b i n d m a c
a n d : i p b i n d m a c
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to turn on IP bandmac policy. Even the IP is not in the
policy table, it can still access into network.
It means to turn off all the bindmac policy.
It means that only those IP address in IP bindmac policy table can
access into network.
It means to display the IP address and MAC address of the pair of
binded one.
It means to add one ip bindmac.
It means to delete one ip bindmac.
It means to type the IP address for binding with specified MAC
address.
It means to type the MAC address for binding with the IP address
specified.
It means to type words as a brief description.
It means to delete all the IP bindmac settings.
It means to set transmission rate for bandwidth limit.
It means to set receiving rate for bandwidth limit.
It means that the bandwidth will be shared for the IP range.
663