Vii-2-2 Bandwidth Limit - Draytek Vigor2860 series User Manual

V I I - 2 - 2 B
V I I - 2 - 2 B
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default upstream
and downstream limit.
Available settings are explained as follows:
Item
Bandwidth Limit
Limitation List
Vigor2860 Series User's Guide
a n d w i d t h L i m i t
a n d w i d t h L i m i t
Description
Enable - Click this button to activate the function of limit
bandwidth.
IP Routed Subnet – Check this box to apply the bandwidth
limit to the second subnet specified in LAN>>General Setup.
Disable - Click this button to close the function of limit
bandwidth.
Default TX limit - Define the default speed of the upstream
for each computer in LAN.
Default RX limit - Define the default speed of the
downstream for each computer in LAN.
Allow auto adjustment...- Check this box to make the best
utilization of available bandwidth.
Display a list of specific limitations that you set on this web
page.
475