Draytek Vigor2860 series User Manual page 140

General Settings
ATM OoS
Open Port-based Bridge
Connection for this
Channel
Open WAN Interface for
this Channel
WAN Setup
126
VPI - Type in the value provided by your ISP.
VCI - Type in the value provided by your ISP.
Protocol - Select a proper protocol for this channel.
Encapsulation - Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
Add VLAN Header – Check the box to enable the following
two options.
VLAN Tag – Type the value as the VLAN ID number. Valid
settings are in the range from 1 to 4095. The network traffic
flowing on each channel will be identified by the system via
their VLAN Tags. Channels using the same WAN type may not
configure the same VLAN tag value.
Priority – Choose the number to determine the packet
priority for such VLAN. The range is from 0 to 7.
QoS Type - Select a proper QoS type for the channel.
Type the values for PCR, SCR and MBS respectively.
The settings here will create a bridge between the LAN ports
selected and the WAN. The WAN interface of the bridge
connection will be built upon the WAN type selected using
the VLAN tag configured.
Physical Members – Group the physical ports by checking the
corresponding check box(es) for applying the port-based
bridge connection.
Check the box to enable relating function.
WAN Application –
Management – It can be specified for general

management (Web configuration/telnet/TR069). If you
choose Management, the configuration for this VLAN
will be effective for Web configuration/telnet/TR069.
IPTV - The IPTV configuration will allow the WAN

interface to send IGMP packets to IPTV servers.
It is available only when VDSL or Ethernet (WAN2) is
selected as WAN Type. Choose PPPoE/PPPoA Client or
Static or Dynamic IP as the WAN mode for such channel.

If PPPoE/PPPoA Client is selected as WAN Setup, you
have to configure the settings listed under ISP Access
Setup. Enter your allocated username, password and
authentication parameters according to the information
provided by your ISP.
Vigor2860 Series User's Guide