Draytek Vigor2860 series User Manual page 437

Available settings are explained as follows:
Item
Activate
Setup Query Server
Setup Test Server
Find more
Test a site to verify
whether it is categorized
Set to Factory Default
Administration Message
Cache
Vigor2860 Series User's Guide
Description
Click it to access into MyVigor for activating WCF service.
It is recommended for you to use the default setting,
auto-selected. You need to specify a server for categorize
searching when you type URL in browser based on the web
content filter profile.
It is recommended for you to use the default setting,
auto-selected.
Click it to open http://myvigor.draytek.com for searching
another qualified and suitable server.
Click this link to do the verification.
Click this link to retrieve the factory settings.
You can type the message manually for your necessity or
click Default Message button to get the default text
displayed on the field of Administration Message.
Preview – A dialog will appear to display the message typed
in the Administration Message.
None – the router will check the URL that the user wants to
access via WCF precisely, however, the processing rate is
normal. Such item can provide the most accurate URL
matching.
L1 – the router will check the URL that the user wants to
access via WCF. If the URL has been accessed previously, it
will be stored in the router to be accessed quickly if
required. Such item can provide accurate URL matching with
423