Ii-4-3 Schedule - Draytek Vigor2860 series User Manual

Vdsl2 security firewall

Hide thumbs Also See for Vigor2860 series:

Table of Contents

The Vigor router has a built-in clock which can update itself manually or automatically by

means of Network Time Protocols (NTP). As a result, you can not only schedule the router to

dialup to the Internet at a specified time, but also restrict Internet access to certain hours so

that users can connect to the Internet only during certain hours, say, business hours. The

schedule is also applicable to other functions.

You have to set your time before set schedule. In System Maintenance>> Time and Date

menu, press Inquire Time button to set the Vigor router's clock to current time of your PC.

The clock will reset once if you power down or reset the router. There is another way to set

up time. You can inquiry an NTP server (a time server) on the Internet to synchronize the

router's clock. This method can only be applied when the WAN connection has been built up.

Available settings are explained as follows:

Set to Factory Default

You can set up to 15 schedules. Then you can apply them to your Internet Access or VPN and

Remote Access >> LAN-to-LAN settings.

To add a schedule:

Click any index, say Index No. 1.

The detailed settings of the call schedule with index 1 are shown below.

Clear all profiles and recover to factory settings.

Click the number below Index to access into the setting page

of schedule.

Display if this schedule setting is active or inactive.

Vigor2860 Series User's Guide