Draytek Vigor2860 series User Manual page 412

To set the IP address manually, please choose Any
Address/Single Address/Range Address/Subnet Address as
the Address Type and type them in this dialog. In addition, if
you want to use the IP range from defined groups or objects,
please choose Group and Objects as the Address Type.
From the IP Group drop down list, choose the one that you
want to apply. Or use the IP Object drop down list to choose
the object that you want.
Service Type Click Edit to access into the following dialog to choose a
suitable service type.
To set the service type manually, please choose User
defined as the Service Type and type them in this dialog. In
addition, if you want to use the service type from defined
groups or objects, please choose Group and Objects as the
Service Type.
Protocol - Specify the protocol(s) which this filter rule will
398 Vigor2860 Series User's Guide