Table of Contents
Advertisement
8.13.2 Downloading a new firmware via elmeg's server PC.
ELMEG GmbH & Co.KG provides a server PC which can be used for loading new firm-
ware into your telephone. In this case, the firmware is downloaded via the ISDN connec-
tion. Download can take eight minutes approximately, depending on the size of the firm-
ware file. Please note that there is a charge for loading firmware via an external ISDN
connection.
Important notice for export variants:
Please ask your specialized dealer/distributor for the access numer of the
download server for your country!
Download server
elmeg server (Germany)
Initiating download of new firmware on the telephone:
If you have changed the telephone PIN (see page 14), you must first enter this PIN, be-
fore you can access the »Service« menu.
Begin as follows:
F
a
Configuration
The telephone then restarts from the BIOS.
S
Press the softkey »Update«.
t
Enter the number of the Server PC:
»05171901190«.
If you are using your telephone with a
PABX system, first enter the line access
digit to obtain external line access.
To cancel a download already in progress
press the softkey »Abort« or the
ton.
Telephone number
++49-(0)5171-901190
S
>
Service
E
51
S
S
Software
ˆelmeg bios 1.00a
ˆInfo
ˆUpdate
ˆPlease dial
ˆ05171901190
ˆ
but-
S
ok
Set
Abort
Advertisement
Table of Contents
