elmeg C310 User Manual page 38

In the menu »Activate announcement« press the softkey »MSN-1«.
The upper display line shows the status of the an-
swering machine for the number that has been dialed
(»MSN-01=off«). The various settings can then be
made on the other lines of the display using the asso-
ciated softkeys.
7.3.1 Setting the mode of operation
S
Press the softkey »Speak«, to set the answerings machine's mode of opera-
tion. The various options are shown one after the other when the softkey is
pressed.
»Speak«
»Speak+sign-off text«
»Announcement only«
»Announc.+sign-off only«
7.3.2 Setting the call signal duration
S
Press the softkey»Active after:10sec« to set the time interval, after
which you wish the answering machine take the call. By pressing the softkey,
the various options are displayed one after the other and can be set:
»:00sec«, »:02sec«, »:05sec«, ...»:120sec«.
ˆ
ˆSpeak
ˆAktiv after:10sec
ˆAnncm. dial
First the caller hears the set announcement, and
can then leave a message after the acoustic
signal.
First the caller hears the set announcement, and
can then leave a message after the acoustic
signal. If the permissible message length is
reached and a sign-off has been stored, the caller
will hear the sign-off.
A caller hears only the set announcement and can
not leave a message.
A caller can not leave a message. First, the caller
hears the set announcement, followed by the
stored sign-off.
34
Setting MSN-1=OFF
Options
ON