8.13 Downloading A New Firmware - elmeg C310 User Manual

The charges for the last connection are
shown in the display.
If you wish to view the sum of all of the cur-
S
rently accrued charges press softkey be-
low »Total«.
S
If you wish to delete the charges for the
last call or for all calls, press the appropri-
ate softkey and then press »delete?«.
If the sum of all the accrued charges is deleted, all MSN charge rate accounts are
deleted simultaneously.

8.13 Downloading a new firmware

•
Do not press any keys (unless prompted to do so) or plug in or unplug any
connectors while data transfer is in progress. If the connecting line is inter-
rupted during a download, restart the download program and proceed as
described previously.
•
Once the new firmware has been loaded completely the telephone per-
forms a RESET and is then available for use again.
•
Under some circumstances all of the data in your phone may be deleted
after a firmware download. If this is the case, a notice is given prior to start-
ing the download. Please backup the configuration data of your phone
before starting.
8.13.1 PC interface of the telephone
You can load the newest firmware versions into your telephone via the phone's PC inter-
face and using the elmeg WIN-Tools CD ROM supplied with the system.
•
Connect the phone to the PC.
•
Load the new firmware into your PC (e.g. from the Internet).
•
Start the elmeg WIN-Tools download program.
•
In the field »Type of connection« set the interface for data exchange
(C-CS310: COM1...COM10, C-CS320: USB)
•
If you wish to load the newest firmware into several telephones simulta-
neously via the available serial PC ports, enter the number of telephones
and set the appropriate port for each telephone (C-CS310 only).
•
Go to »File«, »Open« and select the directory where the new firmware is
stored.
•
In the field »Status« click »Start Download« to begin downloading the new
firmware.
ˆLast conn.
ˆLast conn.
ˆdelete?
ˆTotal:
ˆLast conn.
ˆdelete?
50
1,44 BP }
Total
0,00 BP }
Total