3.4.6.3
Super IO Management: Serial Port 3 Configuration
Options summary:
Use This
Disabled
Device
Enabled
Enable or Disable Serial Port (COM)
Possible:
Use Automatic Settings
IO=3E8; IRQ=11;
IO=2E8; IRQ=11;
Select an optimal setting for IO device
Mode:
RS232, 250K bps
RS232, 1M bps
RS422, 250K bps
RS422, 10M bps
RS485, Driver Half Duplex, 250K bps
RS485, Receiver Half Duplex, 250K bps
RS485, Driver Half Duplex, 10M bps
RS485, Receiver Half Duplex, 10M bps
Chapter 3 – AMI BIOS Setup
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
48