Table of Contents
Advertisement
2.
Open the SetupTXE.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 5 – Install USB 3.0 Drivers (Windows 7 only)
1.
Open the STEP5 - USB3.0 folder followed by Setup.exe
2.
Follow the instructions
3.
Drivers will be installed automatically
Step 6 – Install MBI Drivers (Optional, Windows 8.1/ 10 only)
1.
Open the STEP6 – MBI (Optional) folder and select your OS
2.
Open the Setup.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 7 – Install PenMount Touch 6000 Series Driver (Resistive touchscreen only)
1.
Open the STEP7 –PenMount Touch 6000 folder followed by Setup.exe
2.
Follow the instructions
3.
Drivers will be installed automatically
* The OMNI-2155 uses either 5-wire resistive or projected capacitive multi-touch
technologies. The latter is capable of 10 fingers multi-touch with Windows 7 &
Windows 8.x support.
Step 8 – Serial Port Drivers (Optional)
1.
For Windows 7:
2.
Change User Account Control settings to Never notify
Chapter 4 – Driver Installation
66
Advertisement
Table of Contents
