Table of Contents
Advertisement
2.
To install the driver (patch.bat), you will first have to locate the file in
command prompt. To do that, first go to the directory which contains the
file by entering <drive letter>: eg. if the driver is in D drive, enter D:
3.
You are now at the directory containing the installation file. Next, go to the
folder in which the file resides by entering cd <folder> eg: if the file is in a
folder named abc, enter cd <abc>.
4.
You are now at the folder where the file is located. Enter the patch.bat to
open and install the drivers. If your file is in a subfolder, enter the cd
<folder> command again to access the subfolder (screenshot below is for
reference only).
5.
Reboot after installation completes.
6.
To confirm the installation, go to Device Manager, expand the Ports (COM
& LPT) tree and double click on any of the COM ports to open its
properties. Go to the Driver tab, select Driver Details and click on serial.sys,
you should see its provider as Windows (R) Win 7 DDK Provider.
Chapter 4 – Driver Installation
71
Advertisement
Table of Contents
