HP Elite x2 1011 G1 Maintenance And Service Manual page 88

For use in country or region:
For use in France
For use in Germany
For use in Greece
For use in Hungary
For use in Iceland
For use in India
For use in Israel
For use in Italy
For use in Japan
For use in Latin America
Before removing the keyboard, follow these steps:
1. Shut down the keyboard base. If you are unsure whether the keyboard base is off or in Hibernation, turn
the keyboard base on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the keyboard base.
3. Disconnect the power from the keyboard base by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the keyboard base.
4. Remove the bottom cover (see
5. Remove the keyboard base battery (see
Remove the keyboard:
1. Disconnect the keyboard backlight cable from the low insertion force (LIF) connector (1) on keyboard
base system board.
2. Release the ZIF connector (2) to which the keyboard cable is attached, and then disconnect
the keyboard cable from the keyboard base system board.
3. Release the six retention tabs (3) that secure the keyboard to the top cover.
78 Chapter 6 Removal and replacement procedures – Keyboard base
Spare part number:
793738-051
793738-041
793738-151
793738-211
793738-DD1
793738-D61
793738-BB1
793738-061
793738-291
793738-161
Bottom cover on page
Keyboard base battery on page
For use in country or region:
For use in Slovenia
For use in South Korea
For use in Spain
For use in Sweden and Finland
For use in Switzerland
For use in Taiwan
For use in Thailand
For use in Turkey
For use in the United Kingdom
and Singapore
For use in the United States
74).
75).
Spare part number:
793738-BA1
793738-AD1
793738-071
793738-B71
793738-111
793738-AB1
793738-281
793738-141
793738-031
793738-001