Keyboard Base Battery - HP Elite x2 1011 G1 Maintenance And Service Manual

3. Remove the bottom cover (2).
Reverse this procedure to install the bottom cover.

Keyboard base battery

Description
Battery, 6-cell, 21-WHr, 0.95-AHr, LI (includes cable)
Before removing the keyboard base battery, follow these steps:
1. Shut down the keyboard base. If you are unsure whether the keyboard base is off or in Hibernation, turn
the keyboard base on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the keyboard base.
3. Disconnect the power from the keyboard base by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the keyboard base.
4. Remove the bottom cover (see
Remove the keyboard base battery:
1. Disconnect the keyboard base battery cable (1) from the keyboard base system board.
2. Remove the nine PM2.0×3.6 screws (2) that secure the keyboard base battery to the keyboard base.
Bottom cover on page 74).
Spare part number
750550-005
Keyboard base battery 75