Volume Control - Roksan Audio K3 User Manual

The VOLUME control is a precision device. It follows algorithmic law so that
its response approximates that of the human ear. There is an indicator on
the volume control to show the appropriate volume setting.
!
!
The INPUT Selector Buttons (2) and (3) shift through the inputs one click at a
time. They connect each signal source to the amplifier by shifting through
the Inputs. Pressing the Forward Button (3) repeatedly will select inputs in
this sequence: CD - AUX1 - AV - AUX2 - AUX3 - PHONO
Pressing the Backward Button (2) repeatedly reverses the sequence.
Whenever an input is selected the appropriate indicator light will illuminate.
NB: To select the Bluetooth input, press the Bluetooth on/off button (12).
The Bluetooth on light will flash when selected.
!
Bluetooth Connection and Pairing
Make sure your device's Bluetooth is enabled and press the Bluetooth on/
off button (12) located on the front panel of the amplifier, or the BT button
on the remote. This will select the Bluetooth source and when your device
has found the amplifier, 'ROKSAN K3' will appear on your device. Next,
connect to pair your device. When paired or connected the blue light will
stop flashing and remain on. You are now ready to stream music to the K3
from the paired device. If your device is aptX compatible and contains high
resolution audio files, then these will be streamed in the original high
quality bit rate through the K3.
!
!
!
Page 12
!
!
!

Volume Control

!
Input Selector Button
!
!
Roksan Audio Ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE